IAPMO

    Press Releases

    Get the latest news from The IAPMO Group

    IAPMO’s Uniform Evaluation Service Issues ER-924 and ER-925 to Spray Foam Genie

    24 June 2024

    IAPMO’s Uniform Evaluation Service (UES) has granted UES Evaluation Reports ER-924 and ER-925 to Spray Foam Genie, referencing the 2021, 2018, 2015, and 2012, editions of the International Building Code® (IBC), the International Residential Code® (IRC), and the International Energy Conservation Code® (IECC). ER-924 and ER-925 state that Spray Foam Genie’s SFG 2.0 CC and SFG 1.7 CC satisfy applicable code requirements.

    IAPMO Proudly Supports 2024 National High-Performance Buildings Week

    24 June 2024

    National High-Performance Buildings Week returns June 24-28 in Washington, D.C., with the International Association of Plumbing and Mechanical Officials (IAPMO®) proudly continuing its two decades of support for this annual event. High-Performance Buildings Week is organized by a private sector coalition of building industry stakeholders that support the High-Performance Buildings Coalition (HPBC), of which IAPMO is a founding member.

    IAPMO’s Uniform Evaluation Service Issues ER-924 and ER-925 to Spray Foam Genie

    24 June 2024

    IAPMO’s Uniform Evaluation Service (UES) has granted UES Evaluation Reports-924 and 925 to Spray Foam Genie, referencing the 2021, 2018, 2015, and 2012, editions of the International Building Code® (IBC), the International Residential Code® (IRC), and the International Energy Conservation Code® (IECC). ER-924 and ER-925 state that Spray Foam Genie’s SFG 2.0 CC and SFG 1.7 CC satisfy applicable code requirements. This allows for the specification of SFG 2.0 CC, and SFG 1.7 CC by architects, contractors, specifiers, and designers, and approval of installations by code officials. ER-924 and ER-925 also provide code officials with a concise summary of the products’ attributes and documentation of code compliance.

    IAPMO’s Uniform Evaluation Service Issues ER-826 to Earthbound Corporation

    11 June 2024

    IAPMO’s Uniform Evaluation Service (UES) is pleased to announce that Earthbound Corporation was granted UES evaluation report ER-826 for its Aluminum Plate Extruded (APE) bearing plates to reference the 2021, 2018, 2015, and 2012 editions of the International Building Code® (IBC) and the International Residential Code® (IRC). ER-826 states that the APE bearing plates satisfy applicable code requirements. This allows for the specification of the APE bearing plates by architects, contractors, specifiers, and designers, and approval of installations by code officials. ER-826 also provides code officials with a concise summary of the products’ attributes and documentation of code compliance.

    IAPMO Seeks Technical Committee Members for 2027 USPSHTC, USHGC

    07 June 2024

    The International Association of Plumbing and Mechanical Officials (IAPMO®) is seeking volunteers to participate on two technical committees working toward the development of the 2027 editions of the Uniform Swimming Pool, Spa, and Hot Tub Code® (USPSHTC) and Uniform Solar, Hydronics and Geothermal Code® (USHGC). The deadline to submit an application is August 30. The USPSHTC and USHGC technical committees each seek members in the following categories: manufacturer, user, installer/maintainer, labor, research/standards/testing laboratory, enforcing authority, consumer, and special expert.

    ASSE Seeks Working Group Members for Development of National Standards ASSE 1087 and ASSE 1378

    07 June 2024

    ASSE International is seeking members for two unique working groups. One working group will be updating the standards for Performance Requirements for Commercial and Food Service Water Treatment Equipment Utilizing Drinking Water (ASSE 1087). The other working group will be developing a new standard for the Performance Requirements for Point of Entry Anion Exchange – Nitrate Reduction (ASSE 1378).

    U.S. GSA’s P100 Document Now Requires ARCSA International Standard Compliance

    06 June 2024

    ARCSA International is pleased to announce the United States General Services Administration (GSA) has accepted its proposed change for the Facilities Standards for the Public Buildings Service (P100), requiring major capital projects of more than 5,000 square feet employing rooftop rainwater catchment and harvesting systems to comply with relevant ARCSA/ASPE/ANSI standards.

    U.S. Government Officially Recognizes Uniform Plumbing Code (UPC®)

    06 June 2024

    The U.S. General Services Administration (GSA) has incorporated IAPMO’s Uniform Plumbing Code (UPC®) in its newly released Facilities Standards for the Public Buildings Service (P100), marking the first instance that this federal agency has officially referenced the Uniform Codes. 

    Scroll to top